“This site contains affiliate links for which OEMDTC may be compensated” |
Service Bulletin
Cars
S40/V40
2000-
Section | Group | No. | Year | Month |
2 | 23 | 0045 | 99 | 12 |
Vehicles involved: B4xx4T2/S2 200–
Canister purge (CP) valve, ticking noise
Background
A ticking noise may be heard from the canister purge (CP) valve. The noise increases in cold weather. A rubber-covered clamp that dampens the noise has been introduced as a service solution.
Engine | Model year | Chassis number |
---|---|---|
B4xx4T2 | 2000– | 415000– |
Materials | Number | Replacement part number |
Clamp | 1 | 981143 |
Canister purge (CP) valve, ticking noise
Installing the clamp on the canister purge (CP) valve (turbocharged engines)
1
Remove the outer covers.
Remove the inner cover (4 screws).
2
Remove the canister purge (CP) valve from the mounting on the fan shroud.
3
Cut off the mounting for the canister purge (CP) valve to avoid contact with the new mounting.
4
Install the clamp on the canister purge (CP) valve.
5
Remove the existing screw on the charge air cooler (CAC).
Install the canister purge (CP) valve. Tighten the screw.
6
Check
Check that the clamp is not in contact with the charge air hose. Turn the clamp if necessary.
Install the inner and outer covers
WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type 01.
Operation No. | Labor description | Time allowance |
---|---|---|
25924-2 | Replacing the mounting for the canister purge (CP) valve | 0.3 hr |