Flywheel Capscrews Not Tightened Properly – 2022 Volvo VNL

February 11, 2021 NHTSA CAMPAIGN NUMBER: 21V065000

Flywheel Capscrews Not Tightened Properly

A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.

 

NHTSA Campaign Number: 21V065

Manufacturer Volvo TruckseBay logo North America

Components ENGINE

Potential Number of Units Affected 2

 

Summary

Volvo TruckseBay logo North America (Volvo TruckseBay logo) is recalling certain 2022 VNL vehicles equipped with CumminseBay logo X15 diesel engines. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.

 

Remedy

The affected vehicles are still within the manufacturer’s control. The Volvo TruckseBay logo manufacturing facility will properly torque the capscrews and inspect for possible damage and, if necessary, repair any damage found, free of charge. The recall began January 5, 2021. Owners may contact Volvo TruckseBay logo customer service at 1-800-528-6586.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


*** IMPORTANT SAFETY RECALL ***
NHTSA Recall No. 21E-009

 

February 5, 2021

 

Dear CumminseBay logo OEM Customer:

We are writing to inform you that CumminseBay logo Inc. has determined that a safety-related defect exists in certain Xl5 engines that were manufactured between October 27, 2020 and January 11, 2021. CumminseBay logo has initiated a recall of the subject engines. Our records indicate that some of these engines have been shipped to you.

 

A copy of CumminseBay logo’ initial Part 573 Defect Notification report is enclosed. This notification was submitted to the National Highway Traffic Safety Administration (NHTSA) on February 4, 2021. As more fully described in the Defect Notification, the engine flywheel may be susceptible to detaching from the crankshaft, leading to loss of motive power, which may increase the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, which may increase the risk of personal injury.

 

Enclosed is a list of Engine Serial Numbers for affected engines that our records indicate were shipped to your plants. For engines installed in vehicles that have left your control, we encourage you to make a safety defect determination in accordance with 49 USC 30118 et seq. and, as appropriate, to submit a Defect Notification to NHTSA in accordance with 49 CFR Part 573. CumminseBay logo will conduct the recall, including notifying owners pursuant to 49 CFR Part 577, performing the remedy, and submitting quarterly status reports to NHTSA. CumminseBay logo is requesting that you provide the associated vehicle model identification, VINs  and owner contact information to facilitate owner notification. Please work with your CumminseBay logo account team leader to ensure that the requested information is provided to CumminseBay logo as soon as possible.

 

For engines/vehicles that are still in your inventory, please contact the Customer Quality Assurance representative at the Jamestown Engine Plant to arrange for repairs, as necessary. Please note that Federal law prohibits delivery of these engines, or vehicles equipped with these engines, under a sale or lease until this condition has been remedied.

 

CumminseBay logo will conduct a safety campaign to properly torque the subject capscrews and inspect for possible damage and, if necessary, repair the damage.

 

CumminseBay logo apologizes for this inconvenience, but we are initiating this action in the interest of our customers’ safety and satisfaction with our products. Thank you for your assistance.

 

Please confirm receipt of this communication.

 


VOLVOeBay logo GROUP NORTH AMERICA LLC

March 12, 2021

TO WHOM IT MAY CONCERN;

SUBJECT:
VolvoeBay logo NHTSA ID: 21V065
CumminseBay logo NHTSA ID: 21E-009

Both affected engines had recall completed on the dates listed below.

CumminseBay logo ESN 80302180 – VolvoeBay logo VIN 298336 completed 02/25/21

CumminseBay logo ESN 80302185 – VolvoeBay logo VIN 294355 completed 02/19/21

 

Sincerely,

Gerard M. Hones

Regulatory Affairs
Volvo TruckseBay logo North America

 

VolvoeBay logo Group North America LLC
7900 National Service Rd. (27409)
PO Box 26115
Greensboro, NC 27402-6115

Telephone
(336) 393-2000

 


1 Affected Product

Vehicle

MAKEMODELYEAR
VOLVOeBay logoVNL2022

 


6 Associated Documents

Miscellaneous Document

RMISC-21V065-5595.pdf 131.99KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V065-6682.pdf 76.712KB

 


Recall Quarterly Report #1, 2021-1

RCLQRT-21V065-3740.PDF 211.128KB

 


Recall Acknowledgement

RCAK-21V065-9085.pdf 645.512KB

 


Defect Notice 573 Report

RCLRPT-21V065-1746.PDF 213.65KB

 


Recall 573 Report- November 29, 2021

RCLRPT-21V065-3918.PDF 213.963KB

 


Latest Recalls Documents

 


 

Bestseller No. 1
5417366 Crankcase Breather, Crankcase Oil Separator, Compatible with Cummins X15 XPI Engine, Replace 5679573 4974922
  • 【Fitment】 Compatible with Peterbllt/Kenworth/WesternStar/International trucks, only suitable for model with CumminseBay logo X15 XPl engine.
  • 【Replace OE Number】 5417366 5679573 4974922. Please check fitment information before purchase.
  • 【High-Quality Materials】 Made of high-quality materials to withstand harsh engine conditions. Features efficient filtration, meets strict QC standards, comparable to OEM reliability.
  • 【Easy to Replace】 No modifications required. This crankcase breather assembly installs just like the original part, saving you time and labor costs during replacement. Perfect for professional mechanics and DIY repairs.
  • 【24-Month Warranty】 It is our mission to provide our customers with satisfactory services and products, if you have any problems in installing and using the crankcase breather, please contact us via Amazon mail in time, we will provide you with suitable solutions.
Bestseller No. 2
Turbocharger for Cummins X15 Holset Turbo HE400VG Replaces OE# 5459710 5358453 5358001 5458936, 5458936H, 5458936HX, 5358452, 5351486, 5454978, 5454976, 5454977, 5358453, 5351489, 5351490
  • ✅【Compatible With】 DOFOCH HE400VG Turbo Turbocharger For CumminseBay logo X15 5459710 5459710RX 5358453 5358452
  • ✅【OEM Part number】5459710, 5459710RX, 5358001RX, 5358454, 5358001, 5458936, 5458936H, 5458936HX, 5358452, 5351486, 5454978, 5454976, 5454977, 5358453, 5351489, 5351490, 5351491
  • ✅【Features】The advantages of turbochargers are increased engine power; improved fuel economy and reduced fuel consumption; high reliability, good matching characteristics and high transient response characteristics
  • ✅【Material】Cast iron turbochargers excel in high temperature resistance, strength, and longevity. The manufacturing process is also more mature and more suitable for high-performance vehicles
  • ✅【Buy with Confidence】 DOFOCH offers a one-year guarantee on our turbocharger. If you have any questions, please tell us at any time. Please check the Turbo Model, Turbo Part Number and OEM Part Number on your turbo to make sure it's the right one for your engine
Bestseller No. 3
3163021 Cam Timing Tool Kit, 3163530 Engine Brake Adjustment Tool 7MM, Compatible with Cummins ISX QSX X15 Engine with 4/5/6/7 Degree Wedge Cam Gear Puller Crank Pin, Replace 3163020 3163069
  • Features: This cumminseBay logo tool is used for setting the gear train timing on CumminseBay logo engines with single or double camshaft; Insert the brake tool between the slave pistons contact surface with the exhaust valve adjusting screw to adjust screws on each cylinder
  • Universal Fit: This engine brake adjustment tool is compatible with all CumminseBay logo Engines 2007-2017; Directly replace OEM Cam Timing Tools 3163021, Cam Gear Puller 3163069, Crank Pin 3163020 and 3163530 Engine Brake Adjustment Tool 7MM
  • Premium Material: The cam timing tool kit is made of high-quality steel, sturdy, strong and stable, rustproof, not easy to deform
  • Kit Includes: 1 x Crank Pin (3163020), 1 x Cam Gear Puller (3163069), 1 x Jake Brake Tool (7MM) Feeler Gauge, 4 x Washers, 4 x Screws and 5 x Wedge Kits (1pc 4 Wedge; 1pc 5 Wedge; 2pc 6 Wedges; 1pc 7 Wedge); Comes with a portable case, and a pair of gloves for you, more convenient to use and store
  • Service Assurance: If you are unhappy for any reason or there is some problem with our products, you can get help from us; Customer satisfaction is our top priority
Bestseller No. 4
BTSCAR HE400VG Turbo Turbocharger Fit for Cummins X15 Holset, Replace #5459710 5358453 5358001 5458936 5458936H, 5458936HX, 5358452, 5351486, 5454978, 5454976, 5454977, 5358453, 5351489, 5351490
  • Turbocharger Fitment:HE400VG Turbo Turbocharger For CumminseBay logo X15 5459710 5459710RX 5358453 5358452
  • OEM Part number: 5459710, 5459710RX, 5358001RX, 5358454, 5358001, 5458936, 5458936H, 5458936HX, 5358452, 5351486, 5454978, 5454976, 5454977, 5358453, 5351489, 5351490, 5351491
  • High Performance: The Turbocharger Compressor Housing and Turbine Housing are made of high-strength aluminum and iron, which are more wear-resistant and durable, and resistant to high temperature and corrosion
  • Turbo Funtion: Turbochargers can enhance power performance, improve fuel economy, and achieve greater power output with less displacement, while also reducing emissions
  • Original Equipment Manufacturer (OEM) Standard: Our turbo parts meet original OEM standards and can be installed directly without any additional modifications.
Bestseller No. 5
4918991 Front Crankshaft Seal & Wear Sleeve Remover Installer for Cummins ISX12 ISX15 X15 CM2250 CM2350 CM2450
  • Great Compatibility — This front crankshaft seal installer & remover works for CumminseBay logo ISX12eBay logo & ISX15eBay logo (CM2250,CM2350) and X15 (CM2350, CM2450) with single overhead cam. NOT work on the early dual overhead camshaft ISX engines.
  • Front Crank Seal Install & Removal — This isx12eBay logo engines front crank seal replacement tool is used for installation and removal of front crankshaft seal and wear sleeve without damaging the seal, it credibly prevents the seal from leaking.
  • Superior Quality — This ISX15eBay logo front crankshaft seal installer is constructed with heat-treated steel with black or silver finish, which is great strength, rust-resistance and durable to use. No worries break or crack during the operation.
  • What You Get — 3x Regular Hexagon Nut; 2x Hexagon Flange Head Capscrew; 3x Stud; 1x Replacer Plate; 6x Self Tapping Metal Screw; 3x Round Spacer; 3x Hexagon Spacer; 3x Plain Washer
  • Satisfaction Guarantee – We stand behind our product 4918991 Front Crankshaft Front Seal & Wear Sleeve Remover Installer, with a 30-day-return for money-back guarantee and 12-month warranty, giving you peace of mind during the crank seal replacement on ISX12eBay logo ISX15eBay logo

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...