June 30, 2020 NHTSA CAMPAIGN NUMBER: 20V378000
Seat Belts May Not Restrain Occupant
An unsecured occupant has an increased risk of injury in the event of a crash.
NHTSA Campaign Number: 20V378
Manufacturer Volvo
Car USA LLC
Components SEAT BELTS
Potential Number of Units Affected 307,910
Summary
Volvo Cars of N.A., LLC (Volvo) is recalling certain 2008-2016 V70 and XC70, 2007-2016 S80, 2011-2018 S60 and V60, 2016-2018 S60 Cross Country, 2014-2020 S60L, 2009-2015 S80L, 2009-2016 XC60 and 2015-2018 V60 Cross Country vehicles. The flexible steel cable that connects the seat belt to the front outboard seating positions may fatigue over time, causing the seat belt to not secure the occupant in the event of a crash.
Remedy
Volvo will notify owners, and dealers will replace the seat belt anchor cable for both front seats. The recall began December 10, 2020. Owners may contact Volvo customer service at 1-800-458-1552. Volvo’s number for this recall is R10029.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Volvo has a Recall
SAFETY RECALL NOTICE
NHTSA RECALL 20V-378
August 29, 2020
IMPORTANT SAFETY RECALL
THIS NOTICE APPLIES TO YOUR VEHICLE, VIN: YV9AC9HL9K9999999
Dear Volvo Owner,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Volvo Car USA LLC (Volvo) on behalf of Volvo Car Group, has decided that a defect which relates to motor vehicle safety exists in certain model year 2007±2018 S60 Series, V60 Series, S80 Series, XC60, XC70 and V70 vehicles.
The reason for Recall R10029:
Volvo Cars investigations have identified a problem regarding the front seat belt fastening, mounted on the outboard side of the front seat. The front seat belt fastening cable, may under certain circumstances, suffer from wear and fatigue if repeatedly bent over the seat cushion. This could cause damage to the cable, which could result in reduced or no seat belt restraint function.
Until your vehicle has been repaired, we recommend that the driver and passenger secure that the seat belt fastening is in a vertical position, aligned with the backrest (see pictures), so that it will not be bent over the seat cushion when entering the seat. This will reduce the risk of damage of the seat belt fastening.
The corrective action is to replace the front driver and passenger seat belt fastener with a new fastener, free of charge.
Unfortunately at this time, replacement parts are not available for this repair. Please be assured that Volvo is working to secure the needed replacement seat belt fastener as soon as possible. Estimated time for parts in stock is end of November, 2020. We will send you a second notification letter as soon as the new replacement fastener is available.
Please contact your authorized Volvo retailer to schedule an appointment after the end of November, 2020. This procedure will be completed at no cost and can take up to one hour to complete, however due to service scheduling your Volvo retailer may require your vehicle for a longer period.
If you no longer own the vehicle described in this letter, please help us to update our records by sending us the updated owner information. Please refer to our contact information in this letter.
Please contact:
If you have any questions, please contact your Volvo retailer. If your retailer is unable to answer your questions, please contact Volvo Customer Care Center:
1 Volvo Drive
Rockleigh, NJ 07647
Or by phone at 1-800-458-1552, 24 hours a day, 7 days a week. You may also contact us by going to https://volvocars.us/support.
We have advised the National Highway Traffic Safety Administration (NHTSA) that we are conducting this recall. If you are unable to have this procedure performed without charge, and within a reasonable period of time, you may contact the NHTSA Administrator at:
National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE. Washington, DC 20590
Or you can call the toll-free Vehicle Safety Hotline at 1-800-327-4236 (TTY: 1-800-424-9153). You may also go to their website, https://www.safercar.gov.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
To learn more about Volvo safety recalls, scan the QR Code below or visit us at: https://www.volvocars.com/us/own/additional-choices/recall-information
Your safety and continued satisfaction with your Volvo and the Volvo organization are very important to us. We apologize for any inconvenience this may cause, and we are working to have this important Service completed as quickly as possible.
Sincerely,
Vincent D’Auria
Senior Manager Product, Safety and Compliance ± Regulatory & Compliance
1-800-458-1552
SAFETY RECALL NOTICE
December 9, 2020
NHTSA RECALL 20V-378
IMPORTANT SAFETY RECALL
THIS NOTICE APPLIES TO YOUR VEHICLE, VIN: YV9AC9HL9K9999999
Dear Volvo Owner,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Volvo Car USA LLC (Volvo) on behalf of Volvo Car Group, has decided that a defect which relates to motor vehicle safety exists in certain model year 2007-2018 S60 Series, V60 Series, S80 Series, XC60, XC70 and V70 vehicles.
The reason for Recall R10029:
Volvo Cars investigations have identified a problem regarding the front seat belt fastening, mounted on the outboard side of the front seat. The front seat belt fastening cable, may suffer from wear and fatigue if repeatedly bent over the seat cushion. This could cause damage to the cable, which could result in reduced or no seat belt restraint function, increasing the risk of injury during a crash.
Until your vehicle has been repaired, we recommend that the driver and passenger secure that the seat belt fastening is in a vertical position, aligned with the backrest (see pictures), so that it will not be bent over the seat cushion when entering the seat. This will reduce the risk of damage of the seat belt fastening.
Recall action: R10029
The corrective action is to replace the front driver and passenger seat belt fastener with a new fastener, free of charge.
Please contact your authorized Volvo retailer to schedule an appointment. This procedure will be completed at no cost and can take up to one hour to complete, however due to service scheduling your Volvo retailer may require your vehicle for a longer period.
We apologize for the inconvenience this action may cause you and we are grateful for your cooperation to perform this important operation as soon as possible. Your continued satisfaction with your Volvo is of highest importance to us.
If you no longer own the vehicle described in this letter, please help us to update our records by sending us the updated owner information. Please refer to our contact information in this letter.
Please contact:
If you have any questions, please contact your Volvo retailer. If your retailer is unable to answer your questions, please contact Volvo Customer Care Center:
1800 Volvo Place
Mahwah, NJ 07430
Or by phone at 1-800-458-1552, 24 hours a day, 7 days a week. You may also contact us by going to https://volvocars.us/support.
We have advised the National Highway Traffic Safety Administration (NHTSA) that we are conducting this recall. If you are unable to have this procedure performed without charge, and within a reasonable period of time, you may contact the NHTSA Administrator at:
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE.
Washington, DC 20590
Or you can call the toll-free Vehicle Safety Hotline at 1-800-327-4236 (TTY: 1-800-424-9153). You may also go to their website, https://www.safercar.gov.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
To learn more about Volvo safety recalls, scan the QR Code below or visit us at: https://www.volvocars.com/us/own/additional-choices/recall-information
Your safety and continued satisfaction with your Volvo and the Volvo organization are very important to us. We apologize for any inconvenience this may cause, and we are working to have this important Service completed as quickly as possible.
Sincerely,
Vincent D’Auria
Senior Manager Product, Safety and Compliance – Regulatory & Compliance
1-800-458-1552
Vincent D’Auria
Senior Manager Product, Safety & Compliance – Regulatory & Compliance
December 17, 2020
Subject: Recall R10029
TO: All U.S. and Canadian Volvo Retailers
UPDATE – A second owner notification letter was sent out December 9th, 2020 that will notify the owner of this recall, instructing them to contact their Volvo retailer and request an appointment to have this repair completed.
NEW VEHICLES IN RETAILER INVENTORY
It is a violation of federal law for a retailer to deliver any new Volvo that is eligible for a recall. Retailers are advised to check all vehicles in inventory for recall eligibility and repair immediately. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
USED VEHICLES IN RETAILER INVENTORY
VCUSA is ordering the stop-delivery of affected vehicles in VCUSA, auction and retailer inventory until the recalled item can be repaired. Stopping the delivery of affected used vehicles until the recall is complete is consistent with Volvo’s commitment to safety. Additionally, while Federal law does not prohibit the sale of used vehicles with open recalls, the sale of such cars could violate certain state laws and create liability on behalf of the retailer.
What does this mean for customers?
Customers will not be able to take delivery of affected vehicles until the recall has been completed.
When will this be resolved?
VCUSA is making every effort to expedite parts to complete the recall. Please refer to Parts Bulletin “Recall R10029: Seat Belt Parts Allocation Various Impacted Models” dated 12-11-2020.
Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Recall R10029 on model year 2007 – 2018 S60 Series, V60 Series, S80 Series, XC60, XC70 and V70 vehicles.
Volvo has identified an issue with breakage/fatigue of the steel cable, which is mounted on the outboard side of the front seats and connected to the front seat belts, can overtime suffer from wear and fatigue if repeatedly bent over the seat cushion, this may result in permanent elongation. Fatigue to the cable could lead to insufficient cable strength to support seat belt function during crash and in a worst case could result in reduced or no seat belt restraint function.
The corrective action is to replace the seat belt fastener.
A total of 307,910 U.S. and 24,057 Canadian vehicles are eligible for this recall.
PARTS AVAILABILITY
Please refer to Parts Bulletins.
WHAT SHOULD YOUR CUSTOMERS DO NOW?
Until the vehicle has been repaired, we recommend that the customer secure that the seat belt fastening is in a vertical position, aligned with the backrest (see pictures), so that it will not be bent over the seat cushion when entering the seat. This will reduce the risk of damage of the seat belt fastening.
Vehicle eligibility must be confirmed:
- Warranty Vehicle Inquiry: Where the message Eligible for “Recall R10029 Seat Belt Fastener – Confirm VDN” will appear for eligible vehicles. F4 = History from the main Inquiry menu must be selected to confirm Recall R10029 has not been completed.
-
- Eligibility can also be confirmed in TIE.
- TIE must be checked to confirm each vehicles VDN code.
VDN Code EI02: end fitting 1 side (driver’s side) only must be installed.
VDN Code EI04: end fittings 2 sides must be installed.
- All cars not yet delivered to end customers must be corrected prior to delivery.
- There have been no reports of incidents related to this issue.
All vehicles must be checked for any incomplete recalls or service campaigns or service upgrades. All open Recall, Service Campaign or Service Action repairs must be completed. If you have any questions concerning this recall send them to [email protected].
OWNER NOTIFICATION
A first owner notification letter was sent out December 9th, 2020 that will notify the owner of this recall, instructing them to contact their Volvo retailer and request an appointment to have this repair completed.
PORT VEHICLES
No eligible vehicles are in the ports.
PARTS / PARTS RETURN
Please refer to Parts Bulletin. Additional information regarding parts return will be addressed when available. Please do not discard parts. For instances where a seat belt extender may be required after the repair to accommodate the owner, please refer to SMB 001A “Seat Belt Extender” for part ordering information.
CLAIM SUBMISSION
Please refer to claim submission information as outlined in the Quality Bulletin.
RETAILER RESPONSIBILITIES
Retailers must perform this recall campaign on eligible vehicles regardless of miles/kilometers or vehicle age. All work performed under this recall is free of charge to the owner. As the safety of our customers is our up-most priority, we are taking full responsibility to ensure the highest
quality and safety standards for our cars.
If you have questions about this recall or any other field service action, please contact me or any member of the Product Safety and Compliance office.
Your cooperation in completing this important recall is greatly appreciated.
Drive Safely,
Vincent D’Auria
Senior Manager Product, Safety and Compliance – Regulatory & Compliance
201-647-0004
| VOLVO CAR
SERVICE AND PARTS BUSINESS | |||||
Parts Bulletin | |||||
| SUBJECT:
Recall R10029: Front Seat Belt Fastener 2007 – 2018 S60CC, S60L, V60CC, S60, XC60, V60, XC70, V70, S80, S80L | |||||
| GROUP: 8 | CAT/NO: R10029 | REFERENCE BULLETINS: QB R10029 | CAR MARKET: US/CAN | ||
| COPY TO / CIRCULATIONS (PLEASE INITIAL): | ISSUE DATE:
2020-12-17 | STATUS DATE:
2020-12-17 | |||
| GENERAL MANAGER | PARTS
MANAGER | SERVICE
MANAGER | SALES
MANAGER | ||
| Page 1 of 1 | |||||
“Right first time in Time”
Reference Bulletins: QB R10029
Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Recall R10029 on certain model year 2007 – 2018 60 Series, 70 Series and 80 Series vehicles.
Volvo has identified an issue regarding the front seat belt fastening, mounted on the outboard side of the front seat. The front seat belt fastening cable may, under certain circumstances, suffer from wear and fatigue if repeatedly bent over the seat cushion. This could cause damage to the cable, which could result in reduced or no seat belt restraint function.
The corrective action is to replace the front driver and passenger seat belt fastener.*
A total of 307,910 U.S. and 24,057 Canadian vehicles are eligible for this recall.
The following part numbers apply:
| Part Number | Description | Qty |
| 32341045 | End Fitting (Verify the VDN in TIE to ensure Proper quantity is replaced and claimed) | 1 or 2 |
| 32328849 | Block (Passenger side only model specific Refer to QBI/VCC 519962-2) | 1 |
*In rare instances a vehicle may only be equipped with a pyrotechnic seat belt fastener on the driver’s side seat. In this instance it is only necessary to replace the driver’s side end fitting (VDN EI02).
| VOLVO CAR
SERVICE AND PARTS BUSINESS | ||||||
Quality Bulletin | ||||||
| TITLE:
Recall R10029: Front Seat Belt Fastener, Model Year 2007 – 2018 S60CC, S60L, V60CC, S60, XC60, V60, XC70, V70, S80, S80L | ||||||
| GROUP: 88 | CAT/NO: R10029 | ISSUING DEPARTMENT: Regulations and Compliance | CAR M United State | ARKET: s and Canada | ||
| REVISIONS:
Updates to Section A., B., C., D., G., and I. | ISSUE DATE:
2020-12-17 | STATUS DATE:
2020-12-17 | ||||
| Service Personnel: Read and initial | SERVICE MANAGER | SERVICE WRITER | WARRANTY ADMINISTRATOR | |||
| Page 1 of 5 | ||||||
“Right first time in Time”
A. RECALL R10029 DESCRIPTION
B. VEHICLES INVOLVED
C. PARTS INFORMATION/PARTS RETURN
D. OWNER NOTIFICATION
E. VEHICLES IN RETAILER INVENTORY
F. RETAILER RESPONSIBILITY
G. CAMPAIGN REIMBURSEMENT PROCEDURES
H. TECHNICIAN COMPETENCY REQUIREMENT
I. RETAILER ALLOWANCE
Please read this Quality Bulletin in its entirety prior to beginning any vehicle corrective actions outlined. TIE must be referenced to confirm the VDN code for each vehicle. (Refer to Section B below.) It is imperative that the proper repair procedure is completed on each vehicle involved and that claims are submitted for the correct operation numbers and parts for the actual repair performed. (Refer to Section I for detailed claiming information.)
A. RECALL R10029 DESCRIPTION
Volvo Car USA LLC and Volvo Car of Canada Ltd (Volvo) on behalf of Volvo Car Corporation, has decided to launch Recall R10029 on certain model year 2007 – 2018 60 Series, 70 Series and 80 Series vehicles.
Volvo has identified an issue regarding the front seat belt fastening, mounted on the outboard side of the front seat. The front seat belt fastening cable, may under certain circumstances, suffer from wear and fatigue if repeatedly bent over the seat cushion. This could cause damage to the cable, which could result in reduced or no seat belt restraint function.
The corrective action is to replace the front driver and passenger seat belt fastener.*
*In rare instances a vehicle may only require the driver’s seat belt fastener be installed. The VDN code for these vehicles is EI02.
A total of 307,910 U.S. and 24,057 Canadian vehicles are eligible for this recall.
PARTS AVAILABILITY
Please refer to Parts Bulletin.
WHAT SHOULD YOUR CUSTOMERS DO NOW?
We have no reports of incidents related to the issue.
Customers can also prevent any damages to the cable from occurring when entering or exiting the vehicle (see image below). We recommend that the driver and front seat passenger secure that the seat belt fastening is in a vertical position, aligned with the backrest, so that it will not be bent over the seat cushion when entering the seat.
B. VEHICLES INVOLVED
NOTE: RETAILER MUST CONFIRM VEHICLE ELIGIBILITY PRIOR TO BEGINNING THE REPAIR FOR THIS RECALL.
Vehicle eligibility must be confirmed:
- Warranty Vehicle Inquiry: where the message Eligible for: “Recall R10029 Seat Belt Fastener – Confirm VDN” will appear for eligible vehicles. F4=History from the main Inquiry menu must be selected to confirm Recall R10029 has not been completed.
- Eligibility can also be confirmed in TIE.
- TIE must be checked to confirm each vehicles VDN code.
VDN Code EI02: end fitting 1 side (driver’s side) only must be installed.
VDN Code EI04: end fittings 2 sides must be installed.
All vehicles must be checked for any incomplete recalls or service campaigns or service upgrades. All open Recall, Service Campaign or Service Action repairs must be completed.
If you have any questions concerning this recall send them to [email protected].
PORT VEHICLES
No eligible vehicles are in the ports.
C. PARTS / PARTS RETURN
Please refer to Parts Bulletin. Additional information regarding parts return will be addressed when available. Please do not discard parts. For instances where a seat belt extender may be required after the repair to accommodate the owner, please refer to SMB 001A “Seat Belt Extender” for part ordering information
D. OWNER NOTIFICATION
A second owner notification letter was mailed December 9, 2020 to notify the owner of this recall instructing them to contact their Volvo retailer and request an appointment to have this repair completed.
E. NEW VEHICLES IN RETAILER INVENTORY
It is a violation of federal law for a retailer to deliver any new Volvo that is eligible for a recall. Retailers are advised to check all vehicles in inventory for recall eligibility and repair immediately. Violation of this requirement by a retailer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
USED VEHICLES IN RETAILER INVENTORY
VCUSA is ordering the stop-delivery of affected vehicles in VCUSA, auction and dealer inventory until the recalled item can be repaired.
Stopping the delivery of affected used vehicles until the recall is complete is consistent with Volvo’s commitment to safety. Additionally, while Federal law does not prohibit the sale of used vehicles with open recalls, the sale of such vehicles could violate certain state laws and create liability on behalf of the retailer.
What does this mean for customers?
Customers will not be able to take delivery of affected vehicles until the recall has been completed.
F. RETAILER RESPONSIBILITY
All vehicles qualifying for this recall must be repaired prior to a customer taking possession of the vehicle.
G. CAMPAIGN REIMBURSEMENT PROCEDURES
Recall R10029 claims should be submitted using the LONG FORM application only. Refer to Section I: Retailer Allowance for detailed claiming information.
H. TECHNICIAN COMPETENCY REQUIREMENT
The technician competency requirement for this campaign repair is: Level 2 – Certified Tech.
Click on this link to view a short video on the “End Fitting” repair method:
Click on this link to view a short video on the “End Fitting/Block” repair method:
I. RETAILER ALLOWANCE (LONG FORM APPLICATION)
Claim Type: R10029
Cause Code: 02
CSC Code: XW
Main OP: Only one Labor op can be claimed, 97702 OR 97703
NOTE: There are specific claiming instructions depending on the VDN code and repair completed. Please make sure to submit only the correct operation numbers and parts for the actual repair completed.
VDN Code EI02: In rare instances a vehicle may only be equipped with a pyrotechnic seat belt fastener on the driver’s seat. In this instance it is only necessary to replace the driver’s side end fitting.
| Operation Number | Repair Description | Qty | Labor Time |
| 97702-2 | End Fitting 1 side install acc. QB R10029 | 1 | 0.2 XC60 = 0.1 |
| Part Number | Description | Qty |
| 32341045 | End Fitting | 1 (drivers side only) |
VDN Code EI04: Both the driver’s and passenger’s side are equipped with a pyrotechnic seat belt fastener. It is necessary to replace both end fittings.
| Operation Number | Repair Description |
Qty |
Labor Time |
| 97703-2 | End Fitting 2 sides install acc. QB R10029 | 1 | 0.3 XC60 = 0.2 |
| Part Number | Description | Qty |
| 32341045 | End Fitting | 2 (both sides) |
S60, S60CC, V60, V60CC: As outlined in VCC 519962-2 the passenger seat belt height adjuster may be required to be installed on specific models.
| Operation Number | Repair Description | Qty | Labor Time |
| 97704-2 | Clips, height adjustment install acc. QB R10029 | 1 | 0.1 |
| Part Number | Description | Qty |
| 32328849 | Block | 1 (passenger side only) |
Labor times provided are current at the time of release and are subject to change. Claims will be paid at the time in effect of the repair date.
R10029 Model/Model Year/Chassis breaks
| MY | No. | Production dates | Chassis range | |
| S80 | 2007-2016 | 76676 | 2006-02-07 / 2016-04-08 | 0000850-0200258 |
| S60 | 2011-2018 | 278223 | 2010-05-21 / 2018-08-14 | 0000194-0471810 |
| V70 | 2008-2016 | 324853 | 2007-03-14 / 2016-04-27 | 0000312-0377262 |
| XC70 | 2008-2016 | 152605 | 2007-05-09 / 2016-05-30 | 0000328-0274096 |
| S60CC | 2016-2018 | 4089 | 2015-04-13 / 2018-05-30 | 0000001-0007666 |
| S60L | 2014-2020 | 162137 | 2013-12-13/ 2019-12-23 | 0000097-0231006 |
| S80L | 2009-2015 | 41689 | 2009-09-03 / 2015-11-21 | 0005101-0087833 |
| V60 | 2011-2018 | 367509 | 2010-06-22 / 2018-08-27 | 0001066-0412296 |
| XC60 | 2009-2016 | 722460 | 2008-03-18 / 2016-04-22 | 0000022-0928332 |
| V60CC | 2015-2018 | 53460 | 2014-12-04 / 2018-08-21 | 0000025-0059826 |
73 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| VOLVO | S60 | 2011-2018 |
| VOLVO | S60CC | 2016-2018 |
| VOLVO | S60L | 2014-2020 |
| VOLVO | S80 | 2007-2016 |
| VOLVO | S80L | 2009-2015 |
| VOLVO | V60 | 2011-2018 |
| VOLVO | V60CC | 2015-2018 |
| VOLVO | V70 | 2008-2016 |
| VOLVO | XC60 | 2009-2016 |
| VOLVO | XC70 | 2008-2016 |
23 Associated Documents
R10029 Model/Model Year/Chassis breaks
Non-Compliance 573 Report
RCLRPT-20V378-4984.PDF 215.172KB
Recall Acknowledgement
RCAK-20V378-5729.pdf 244.821KB
Manufacturer Notices(to Dealers,etc) – December 17, 2020 Subject: Recall R10029 Update 12.17.20
RCMN-20V378-6594.pdf 287.041KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V378-0874.PDF 211.142KB
Remedy Instructions and TSB
RCRIT-20V378-6371.pdf 626.231KB
Remedy Instructions and TSB
RCRIT-20V378-0234.pdf 1675.421KB
Recall 573 Report-Amendment 2
RCLRPT-20V378-4123.PDF 215.175KB
Recall 573 Report-Amendment 1
RCLRPT-20V378-9033.PDF 215.169KB
Remedy Instructions and TSB
RCRIT-20V378-5044.pdf 3264.801KB
Remedy Instructions and TSB
RCRIT-20V378-5894.pdf 1094.031KB
Recall 573 Report-Amendment 3
RCLRPT-20V378-1489.PDF 215.242KB
Remedy Instructions and TSB
RCRIT-20V378-9229.pdf 2073.419KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V378-8236.PDF 211.251KB
Manufacturer Notices(to Dealers,etc) – Retailer Letter R10029 UPDATED 8.28.2020
RCMN-20V378-3948.pdf 778.804KB
Manufacturer Notices(to Dealers,etc) – Retailer Letter R10029 6.30.2020
RCMN-20V378-2880.pdf 652.638KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V378-0753.pdf 285.213KB
Remedy Instructions and TSB
RCRIT-20V378-2601.pdf 229.063KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V378-1437.pdf 789.902KB
Remedy Instructions and TSB
RCRIT-20V378-0813.pdf 400.907KB
Remedy Instructions and TSB
RCRIT-20V378-0515.pdf 2073.722KB
Remedy Instructions and TSB
RCRIT-20V378-9813.pdf 3265.913KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V378-2313.PDF 211.349KB
Latest Recalls Documents
- ALL SYSTEM DIAGNOSTICS FOR VOLVO BRANDS - Foxwell NT530 Car Diagnostic Scan Tool for Volvo is capable of diagnosing all available electronic systems such as ABS, SRS, SAS, Transmission, EPS, Auto Bleed, TPMS, D-P-F, EPB, Oil Reset, HVAC, Keyless Entry, LKAS Control - it helps you diagnose and calibrate your vehicle's faults - no more dealership and SAVE thousands of dollars on your car's maintenance
- ADVANCED MAINTENANCE SERVICE FEATURES - This automotive OBDII scanner works specifically with Volvo and supports body, chassis, powertrain and other control modules check; it also performs coding, resest oil reminder and service lights, deactivates parking brake for brake change, resets throttle position sensor, regenerate d-pf, replace battery, crankshaft sensor relearn, etc
- FULL OBD 10 MODES WITH NO SUBSCRIPTION FEE - This professional auto scanner diagnostic tool can not only do maintenance service resets but can also work on OBDII system - reads and clears codes, turns off MILs, requests and records live sensor data (supports 2 PIDs graphing and numerous live PIDs in text) and freeze frame - full OBDII 10 Modes are not limited to to Volvo vehicles, you can also test it on other brand vehicles, such as on BMW, Mercedes-benz, GM, Porsche, Toyota, etc
- BEST DIYER DIAGNOSTIC TOOL - NT530 scanner works with Volvo brands and is the best scanner for DIYers - bidirectional operation, active test
- NEW HISTORY FEATURE - History feature allows you to save history data and VIN number, no need to input it manually every time
- If you have any questions before or after you purchase the products, please visit iCarsoft official website
- iCarsoft VOL V2.0 can do it all-reads and clears trouble codes for Volvo/Saab on all the systems such as engine, transmission, ABS and airbag etc.
- Support OBD II/EOBD ten modes of operation full ecu diagnosis Update free The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports
- Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Battery Management System (BMS) reset
- NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note：The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Wide Compatibility Heavy Duty Truck Scanner] Compatible with a wide range of 12V & 24V heavy-duty trucks across North America, including major truck brands such as Freightliner, Peterbilt, Kenworth, International, Volvo, and Western Star, with support for common diesel engines from Cummins, Detroit, and PACCAR. Whether you're an owner-operator, fleet manager, or repair technician, HD601 helps simplify routine inspections, preventive maintenance, and everyday fault checks. Vehicle coverage may vary by model year, system, and configuration
- [Full-System Diagnostic Truck Scanner] This heavy duty diagnostic scanner supports full-system diagnostics for heavy-duty trucks, including Engine, Transmission, ABS, and more.It helps quickly identify faults, pinpoint problem areas, troubleshoot faster, and understand which systems need attention before repairs. Compatible light-duty vehicles support OBD2 diagnostics only
- [DTC Library + Live Data] This truck diagnostic scanner's built-in DTC library helps truck drivers, DIY users, and more quickly understand fault information. You can also manually enter standard SPN and FMI codes to look up fault details. For roadside situations without internet access, it helps identify possible problem areas
- [2-in-1 Heavy Duty & OBDII Diagnostics] This heavy duty scanner supports both HDOBD and OBDII diagnostics. It provides essential functions including Quick Scan, Full Scan, Live Data, Freeze Frame Data, Fault Code Reading and Clearing, and more. It supports HDOBD protocols such as J1939 and J1587/J1708 for reliable vehicle communication
- [Supports Multiple Vehicle Types] Suitable for various commercial vehicles, including heavy-duty trucks, semi-trucks, buses, and more. This truck scanner diagnostic tool features 6/9/16-pin connectors to support common vehicle interfaces, making it suitable for different vehicle applications and transportation needs
- 【One Device Covers 3 Vehicle Make Group 】 iCarsoft VOL V4.0 comes pre-installed with software for Volvo/Saab, making it ready to use right out of the box. 2 further vehicle groups can be free to downloaded when you need it( for Porsche/ BENZ/AUDI/ LAND ROVER/ VW and more). LIFETIME FREE UPDATES, NO SUBSCRIPTION COST! VOL V4.0 diagnose all vehicle systems of Volvo /SAAB series cars (ABS,BMS, Over Head Console,VGLA and more). NOTICE: Compatible with Volvo/Saab models from 1996 to 2025, SUGGEST TO FIRST CHECK THE COMPATIBLE VEHICLE MODELS/YEARS IN BELOW INFO
- 【Upgraded Maintenance Service】 It integrates 9 commonly-used service functions for daily maintenance and 20 advanced professional functions for complex repair tasks：Oil Reset, ETC, EPB, SAS, DP-Regen, DWR, ODO, BMS, ABS Bleeding, Injector coding, TPMS, Air Suspension, Air Conditioner, Head Lamp, Engine, Transmission, Airbag, Seat, Fuel Pump, Engine Idle, Ga-sparticulaterfilter, NOxSensor, Turbocharger, Rada/Camera, OxygenSensor, etc. With 317 sub-services under above services for precise vehicle maintenance! TIPS: Extra 2 diagnostic software you installed for other cars may contain up to 49 services. just ask us for services details.( quantity of above services may vary based on car model)
- 【Supports the Latest CAN-FD Protocol】 CAN-FD (Controller Area Network – Flexible Data-rate) is a next-generation automotive communication protocol adopted by Volvo/Saab- SPA (XC90 / XC60); CMA (XC40); S60/ V60; Recharge EV; Saab 9-3/9-5
- 【Advanced Bidirectional Test】 The iCarsoft VOL V4.0 goes beyond basic code reading by giving you the power to send commands directly to vehicle systems and Control Modules. Perform real-world active tests—such as cycling the ABS motor pump, ABS Relay, operating windows, sunroof, or triggering the EVAP system—to accurately locate faults instead of guessing. After repairs or part replacements, use bidirectional test functions to re-learn and calibrate components, ensuring the system runs smoothly like factory settings.
- 【Powerful Hardware & Battery Registration 】iCarsoft VOL V4.0 car diagnostic tool is equipped with a 5-inch Ultra HD Touch Screen, Android operating system, Quad Core 1.3 GHz processor, 32GB memory and a 5000mAh battery for around 6 hours of continuous use. It offers a user-friendly interface and an ultra-smooth diagnostic experience. It can perform new battery registration for Volvo model/year: S60(2019-2020); S90(2017-2020); S90L(2017-2020); V60(2019-2020); V60 CROSS COUNTRY(2019-2020); V90 (2017-2020); V90 CROSS COUNTRY( 2017-2020); XC40( 2018-2020); XC60(2018-2020); XC90( 2016-2020) )
This product presentation was made with AAWP plugin.