R39413 – CEM Software Upgrade – 2014 Volvo

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA

13V377

SUMMARY:

Volvo is recalling certain model year 2014 S60, S80, XC60 and XC70 vehicles equipped with keyless ignition. In the affected vehicles, the Central Electronic Module (CEM) will not perform as intended.

As a result, the front windshield wipers might run continuously when the ignition is on.

Also, the turn signals, high beams, and headlight switch might not work.

 

CONSEQUENCE:

Malfunctioning head lamps and/or turn signals increase the risk of a crash.

 

REMEDY:

Volvo will notify owners, and dealers will upgrade the CEM software, free of charge.

The recall began on October 3, 2013.

Owners may contact Volvo at 1-800-458-1552.

 

NOTES:

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Volvo has a Recall

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [615.32 KB]

 

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [78.14 KB]

 


 

VIDA 2015

Welcome to the new VIDA. Several years of development have been put into this new workshop application. We have incorporated feedback from our users, as well as made changes to accommodate our future vehicles. VIDA 2015 has an extensive HELP section which can be reached at any time simply by hitting the “F1” button on your keyboard.

VIDA 2015 is 100% internet based, which means you will always have the most current information at your fingertips. Changes and corrections can be applied with a much shorter lead time.

  • Volvo Standard Time (VST) information is integrated into VIDA.
  • Starting with XC90, fault tracing will be displayed and shown in a ranked order.
  • Wiring Diagrams will be an integrated part of the repair process.

So install VIDA 2015 and explore the great changes and improvements of this new workshop application.

Vehicle Communication Tools

NOTE

XC90 (16-) reference SMB 00-337. All older vehicles can still use DiCE or J2534.

A vehicle communication tool transfers data from a VIDA workstation to the correct receiver in the vehicle.

VIDA supports DiCE and J2534 devices. Volvo Car Corporation recommends DiCE for vehicle communication with D2 and GGD protocol-based vehicles.

DiCE

DiCE uses a Bluetooth connection to transfer information between VIDA and the vehicle. A USB cable can be used as an alternative to the Bluetooth connection.

Please note that no third party Bluetooth dongles can be used with DiCE, only Volvo Cars DiCE equipment can be used.

Multiple DiCEs

It is possible to connect more than one DiCE to VIDA and download software to as many as three vehicles in parallel and have one vehicle in the diagnostic workflow at the same time. One VIDA workstation with four DiCEs can thus handle four vehicles simultaneously.

J2534 devices

For all vehicles with model year 2004 and later, equipped with OBD and reprogramming capability, manufacturers shall comply with SAE J2534. There are two different versions of J2534:

  • J2534-1 can be used to download software to vehicles from, and Including, model year 2004. J2534-1 manages software to control modules on CAN HS (Controller Area Network High Speed) that are emission related. J2534-1 cannot be used for diagnostics.
  • J2534-2 manages software download to control modules on both CAN HS and CAN MS (Controller Area Network Middle Speed).

The hardware used to validate VIDA’s compliance with J2534 can be purchased separately from third-party suppliers. Validation has been done using the following J2534 pass-thru devices:

For more information regarding these devices, please contact the respective manufacturer.

Leave a Comment

Share to...